Megapixels-Do They Matter?

Hey the new iphone 4s is coming with an 8 megapixel camera, but does that really mean its going to take better pictures?

Yes its going to take better pictures, but only because its going to have 5 lenses, better aperture to bring in more light,  and a new larger sensor.

So how many megapixels do you really need?

See in the past, the 2g(first) iphone, the 3g, the 3gs and the 4 were all almost capable of taking fantastic pictures, but they lacked the lens and sensor to do so. Its always been the Lens that makes the difference in good pictures.

Sure having 8 megapixels is nice, but only if you are going to print out 16×20 inch photos for your wall. Let me explain.

The choice of how many megapixels you need on your phone depends on what you want to do with your photos. If you just want to capture life’s memorable moments, send them to friends and family, and post them on the Web, a 1.3 or 2 MP camera will do the job. If you want to take high-resolution pictures, blow them up, and edit them on your computer, then pixel-size really matters.

This guy explains it really well.


So you see you can’t always believe the hype when it comes to advertising megapixels. People tend to go on the notion that more is better. Especially in this case when all the cellphone makers are competing to be the leader. Most people will buy simply based on how many megapixels a camera is cause the average consumer thinks that more is better.

The latest cellphone trying to get the top megapixel spot is the “Samsung’s M8910 Pixon12” capable of 12 megapixels.

Crazy isn’t it?

This is terrible for networks and network speeds. Emailing a 12 megapixel photo from your cell phone? Forget sending that over MMS. Are you serious? That’s going to be 9-10 megabytes in size. Ridiculous!

If you can take anything away from this short article and video, just remember that when it comes to purchasing a Digital SLR camera, a point and shoot, or cellphone with high megapixel camera, just remember its all in the lens and not the advertised megapixel. Please do not believe that the more megapixels the camera has, the better this is. This was not the case with the iphone 2g, 3g, 3gs, and 4.



Apple Tablet-Iphone OS Based

In an interview with CNBC, McGraw-Hill’s CEO confirms that their textbooks will be on the Apple Tablet and it will be an iPhone OS based machine. When asked about rumors that their textbooks will be on the Apple tablet, Terry McGraw responds:

“Yeah, Very exciting. Yes, they’ll make their announcement tomorrow on this one. We have worked with Apple for quite a while. And the Tablet is going to be based on the iPhone operating system and so it will be transferable. So what you are going to be able to do now — we have a consortium of e-books. And we have 95% of all our materials that are in e-book format on that one. So now with the tablet you’re going to open up the higher education market, the professional market. The tablet is going to be just really terrific.”


How cold weather can affect electronics

Since we are approaching the fall/winter season, I felt it appropriate to discuss how the weather affects our electronics. When I say electronics, I am really referring to items like laptop/notebook computers, and cameras left in a cold or freezing vehicle overnight.

First let me just say that leaving your laptop/notebook computer in your vehicle overnight is not really a good idea at all if you value what is on it. You just never know what could happen, worst thing being that it gets stolen. Remember if it can go wrong it probably will.

Now with that out of the way I’m going to cut straight to it. Have you ever brought in a pair of sunglasses or a compact disc from your cold vehicle indoors and noticed how it fogged up? Well this is what happens to your laptop/notebook computer when you bring it in from the cold after it has been sitting in the car all night.

Your hard drive platters and circuit boards develop condensation when it goes from cold to warm or hot and this could cause for some nasty short circuiting of your precious item.

In general, laptop/notebook computers are remarkably resilient when it comes to dealing with low temperatures (down to around 0 degrees F or -17 C).

However, cold can and does affect the LCD screen and disk drive. LCD’s are liquid crystal devices which can freeze if the temperature goes low enough. In addition, the fluorescent tube that provides the backlight to the screen (called a CCFL) can be dimmer due to the cold.

Both the LCD and the CCFL generally recover as they warm up and will operate normally afterwards. It is not clear whether this shortens the life of either component as I do not have any data from comparison testing.

Disk drives can also be affected by the cold. First, there are two types of disk drives. One uses ball bearings and a race around the shaft of the drive. The other uses fluid dynamic bearings (FDB), rather than the ball bearings. FDB drives are almost always used in laptops and have the advantage of lower noise and the ability to spin at higher speeds.

Mechanical disk drives with bearings seem to survive extremely low temperatures better than the FDB drives. As the temperature approaches single digits Fahrenheit (around -12 C), the fluid in the bearings thickens and the drive platter cannot spin at the appropriate speed. This can cause a boot failure.

In almost all cases, FDB drives returned to normal operation after just a few minutes in a warm environment. If the drive is inside the computer case, the heat from the processor will often warm it up and a reboot can be accomplished. On the other hand, for those external USB drives, you may want to wait a while longer for it to warm up.

So with cooler temperatures approaching, just keep all this in mind the next time you take your portable office with you home, and decide you are too tired to take it inside where it’s nice and cozy.

Toshiba A75 Poor Design Causes Overheating

I recently had the pleasure of working on a Toshiba A75 laptop and found out first hand just how horrible the design on this model is.

My clients problem with this laptop was that it would shut down not 10 minutes after booting. It couldn’t be timed either. Sometimes it was 5 minutes, sometimes 7 minutes, so this led me to believe that it was overheating somehow.

The fans appeared to be functioning properly, I mean they were spinning their blades off. You could see from underneath when you turn the laptop on its side.

I figured it had to be overheating, so I quickly googled a little history on this laptop and discovered that it was notorius for doing this due to poor design.

I took it upon myself to completely disassemble the computer and clean out the dust, hoping that this was the problem. Once I had completely ripped the thing down to the processor, I couldn’t believe what I had found.

There are two main parts to the CPU heat sink. The first part (the one that you can see from the vent at the back of the computer) was restricted to about 40% of full air flow by a wall of dust. This was the better part. The other part of the heat sink (the part right over the CPU), was completely plugged SOLID with dust.

I cleaned all this matted up lint out, put it back together, and ever since, the fan hasn’t even had to go on high power because it cools just fine. Toshiba has simply very poorly designed its heat sink and it therefore acts more like a dust trap than a heat sink. If you need instructions on how to disassemble your Toshiba, check out: the instructions are very clear.

Below are some photos I took of the dust that was trapped in the cooling fins.